Aluminum Stand Off Measures 5/8" x 1-1/2"
- Holes that are 7/16" wide are required in signage that uses the machined aluminum standoffs.
- The finish of the spacers is clean and polished and lends themselves to any environment!
- The supports are priced to be affordable for any budget!
This aluminum stand off, called a mounting support, is an affordable way to mount and showcase professional displays. Whether your sign is made of acrylic, wood or another material this inexpensive hanging fixture can do it all. The stand off will accentuate any décor because of its polished finish and sleek look. Use the mounting hardware to hang your business logo in your lobby or to display your college degree on your office wall. The sign support, aluminum stand off may be small in stature, but it can add that special shine to any lobby or office fixture. The display hanging fixture should be used to mount smaller signs because of its diminutive diameter.
The aluminum stand off can only be used successfully if holes with that are 7/16" in width are drilled into your signage ahead of time. Don't worry about buying screws or wall anchors because all of the necessary hanging hardware is provided for in your purchase. The aluminum stand off only requires the installer to have access to a drill for screwing the proper parts into the wall. Once the holes are made in your sign, just screw the barrel section of the fixture to your wall, set your plaque on top of it, and then tighten the cap section of the fixture into the barrel. The aluminum stand off should be screwed by hand tightly onto your display panel. The lightweight sign support can mount materials that are no larger than 3/4" thick.
|Units Per Set||4|
|Placement Style||Wall Mounted|
|Distance From Wall||1.5"|
|Max. Sign Thickness||0.8"|
|Required Hole Dimensions||0.4"|
|3 - 9||$10.35|
|10 - 30||$9.76|
|31 - 107||$9.28|
|108 - 285||$8.74|
|286 - 730||$8.21|